Use Wps For Wireless Connection - TP-Link TL-WA1201 User Manual

Chapter 3
3. 6.

Use WPS for Wireless Connection

Wi-Fi Protected Setup (WPS) provides an easier approach to set up a security-protected
Wi-Fi connection.
Note:
• The WPS function cannot be configured if the wireless function of the access point is disabled. Please
make sure the wireless function is enabled before configuration.
• When working in Range Extender or Client mode, the WPS function of the access point is not available.
• The WPS function is enabled by default. You can go to
the function as needed.
1. Visit http://tplinkap.net, and log in with the password you set for the access point.
2. Go to Settings > Wireless
3. Follow one of the following methods to connect your WPS-enabled client to the
access point's Wi-Fi network.
• Method 1: Using the WPS button
1 ) Click the Start WPS
2 ) Within 2 minutes, press the WPS button on your client.
3 ) A success message will appear on the WPS page when the device successfully
join the access point's network.
• Method 2: Enter the access point's PIN on your client
1 ) Click Other Methods -- PIN Code
2 ) Check your access point's PIN. You can use the default PIN or generate a new
one.
3 ) Enter this PIN on your client for it to join the access point's network.
• Method 3: Enter the client's PIN
Settings
> WPS.
button on the WPS page.
on the WPS page, and then select
Customize Your Network
> Wireless > WPS > Advanced to disable
Router's PIN.
22