Dhcp Client List - TP-Link TL-WA901N User Manual

Chapter 4
• Default Gateway (Optional)
the access point. The default value is 192.168.0.254.
• Default Domain (Optional)
• Primary DNS (Optional)
• Secondary DNS (Optional)
provides two DNS servers.
Note:
• To use the DHCP server function of the access point, you must configure all computers on the LAN as
Obtain an IP Address
• When you choose
will see the page as below.
4. 3. 3.
1. Visit http://tplinkap.net, and log in using the password you created.
2. Go to
point.
• Client Name
• MAC Address
• Assigned IP
• Lease Time
expired, a new dynamic IP address will be automatically assigned to the user.
You cannot change any of the values on this page. To update this page and show the
current attached devices, click Refresh.
Downloaded from ManualsNet.com
- It is suggested to input the IP address of the LAN port of
- Input the domain name of your network.
- Input the DNS IP address provided by your ISP.
- Input the IP address of another DNS server if your ISP
automatically.
Smart IP (DHCP)

DHCP Client List

DHCP > DHCP Client List
- The name of the DHCP client.
- The MAC address of the DHCP client.
- The IP address that the access point has allocated to the DHCP client.
- The time of the DHCP client leased. After the dynamic IP address has
search engine
in Network > LAN, settings of the DHCP server is unchangable. You
to view the information of the clients connected to the access
Configure the Access Point
22