Table of Contents
Advertisement
28
8-digit display messages
Message
SEARCH n
SEL n
SEL SLOT
SLOT n
WRITE n
Autoloader display error codes
If an error occurs in the autoloader mechanism, the 8-digit
display will contain: "ERROR x " where x is a two-digit error
code. The following table describes these errors and lists
possible causes.
Error
Code
10
11
20
30
31
40
41
42
Description
A space command is being processed on the cartridge
from slot n .
Slot n has been selected using the Step button.
The magazine is present, but a cartridge is not inserted in
the drive.
This message alternates with the CHK MAG message to
show that the cartridge in slot n is incorrectly inserted.
The drive is writing to the cartridge from slot n .
Description
Magazine initialization failure
Magazine initialization failure
Magazine ejection failure
Magazine positioning error
Magazine positioning error
Cartridge insertion failure
Cartridge insertion failure
Cartridge insertion failure
DAT Autoloader Installation Manual
Possible Cause
Improper cartridge insertion
Improper cartridge insertion
Improper cartridge insertion
Improper cartridge insertion
Improper cartridge insertion
Contamination or
misalignment of the cartridge
insertion rollers
Failure of the cartridge drive
mechanism
Failure of the cartridge drive
mechanism
Advertisement
Table of Contents
