Table of Contents
Advertisement
SGN141S-1 R290 Self-Contained Low Height Open Refrigerated Display Cabinet
Slipping -
Surfaces may become slippery due to
spillage from the case during operation or
cleaning
Cuts and stabbing -
Cleaning cold glass surfaces with hot water
Crushing -
fingers, hands or body between product
trays
Electrical -
electrical connections in cases
To obtain warranty information or other support, contact your nearest Hussmann representative.
Please include the following:
Customer and site location.
Cabinet model & serial number.
Reason for warranty.
Start-up Check List
Step
1
Read, and place this install/operation manual in a safe place for future
reference.
2
Examine unit. Confirm there is NO damage or concealed damage.
3
Level the unit, side to side and front to rear. Check for stability and ensure roller
wheels are not in contact with the floor once in final position.
4
Remove all shipping braces etc.
5
Unit connected to a dedicated electrical circuit, without the use of anextension
cord.
6
The proper electrical supply has been used for the equipment.
7
Verify all electrical wiring is secured and clear of any sharp edges or hot lines.
July2021 Final Rev: 30A01
Visual Inspection. Appropriate remedial action.
Do not use hot water to clean any parts of the cabinet.
Staff must be trained in the correct procedures for cleaning
cases and ergonomic practices
Operators to always lift product trays using finger pulls
provided, ensuring the area is clear of other persons.
Electrically isolate cases before work begins. An electrical
work must be carried out by an appropriately trained
Start-up Activity
service provider.
Manual
Check
25
Advertisement
Table of Contents
