114 | Drystar 5500, Drystar 5503 | Problem solving
Film input tray feed jams
The following screen indicates that a jam occurred in the feed section of the
input tray(s):
A message will inform you if either the upper or lower input tray is jammed.
To remove a jammed film in the input tray (e.g. upper input tray):
1. Start the procedure to stop printing.
2. Wait while the printer is finishing printing any current jobs.
The printer is ready when the second message appears.
3. Open the film input tray.
4. To get a clear view, remove any remaining film sheets.
2900J EN 20180320 1448