126 | Drystar 5500, Drystar 5503 | Problem solving
Film identification problems
When you load a new film pack, the new Film Identification tag is read and
the tray film format and type are set based upon the info in the Film
Identification tag (RF-tag).
This tag is only readable when the film pack is inserted in the correct way.
There are several possible error messages regarding film identification:
Topics:
•
No identification code detected
•
Identification code error for upper/lower input tray
•
Identical identification code detected in upper/lower input tray
•
Film overrun from current pack
2900J EN 20180320 1448