AGFA Drystar 5500 Reference Manual page 24

24 | Drystar 5500, Drystar 5503 | Advanced Operation (key-operator mode)
If you want to save the configuration on the back-up floppy, select 'yes'
and press the Confirm key. The printer will now enter the 'Saving the
current configuration'.
If you only want to save the configuration on the printer hard disk, select
'no' and press the Confirm key.
Next, the following screen is displayed:
Press the Confirm key to reset. After the reset, the new settings will be
active.
Press the Escape key to quit the application. The old settings will remain
active until the next reset.
Related Links
Saving the configuration settings
2900J EN 20180320 1448
on page 51