Recording Formats And Input/Output Signals; Differences Among Hdv 1080I, Dvcam, And Dv Formats; Input And Output Signals In E-E Mode - Sony HDV HVR-1500 Operating Instructions Manual

Recording Formats and Input/Output Signals

Differences among HDV 1080i, DVCAM, and DV formats

The following table illustrates differences among the
features of the HDV 1080i, DVCAM, and DV formats.
Item
Track width
Audio sampling
frequency (maximum
number of channels)
Audio recording mode
Timecode
1) For audio signal recording, there are two modes: locked mode and
unlocked mode. In the locked mode, the audio sampling clock signal and
video sampling clock signal are synchronized. In the unlocked mode
adopted for the consumer DV format, the audio and video sampling clock
signals are independent. The locked mode is preferable to the unlocked
mode in compatibility with higher level formats. The locked mode is also
preferable in terms of digital processing during audio editing and for
creating smooth audio joins.

Input and Output Signals in E-E Mode

When the HVBK-1505 option board is installed, the
relationships between input signals and output signals in
E-E mode is as shown in the following tables.
• Select the input signal with the INPUT SELECT buttons
in the video/audio input selection section on the front
panel.
• Select the analog video signal output with the
INTERFACE SELECT >VIDEO OUTPUT menu item
(see page 83).
34
Recording Formats and Input/Output Signals
HDV 1080i
10 µm
16 bit: 48 kHz (2 channels) 12 bit: 32 kHz (4 channels)
1) Locked mode
4)
Drop-frame (60i only)
4)
No user bit data
DVCAM
15 µm
16 bit: 48 kHz (2 channels)
Locked mode
NTSC: SMPTE timecode (DF/NDF,
with user bits)
PAL: EBU timecode (with user bit
data)
2) This unit does not support 16 bit: 32 kHz, 16 bit: 44.1 kHz recording.
3) This unit performs recording in locked mode.
4) For the 60i mode, this unit has extended functionality to allow DF/NDF
selection, and to allow user bit data to be set.
For usable cassettes, see "Usable Cassettes" (page 39).
DV
10 µm
12 bit: 32 kHz (4 channels)
16 bit: 32 kHz, 44.1 kHz, 48 kHz (2
2)
channels)
3)
Unlocked mode
4)
Drop-frame (NTSC only)
4)
No user bit data