Sony HDV HVR-1500 Operating Instructions Manual page 82

AUDIO CONTROL [Audio]: Settings related to audio
control
LEVEL SELECT [> Level Sel] REF LEVEL [>> REF Level]:
INT AUDIO SG [> Audio SG]: Select the operation of the
internal audio test signal generator.
82
Menu Contents
Select the audio
reference level
(headroom) for recording
on tape.
CH1 IN LEVEL [>> CH1
input]: Select the audio
level setting according to
the audio level of the
signal input to the AUDIO
IN 1/3 connector.
CH2 IN LEVEL [>> CH2
input]: Select the audio
level setting according to
the audio level of the
signal input to the AUDIO
IN 2/4 connector.
OUTPUT LEVEL [>> Out
Level]: Select the analog
audio output reference
level.
Description of settings
*–20 dB [>>> –20dB]: Set to –20 dB.
–18 dB [>>> –18dB]: Set to –18 dB.
–16 dB [>>> –16dB]: Set to –16 dB.
–12 dB [>>>–12dB]: Set to –12 dB.
Notes
• This setting is valid in DVCAM format only. When the
recording format is DV, the reference level is fixed at
–12 dB.
• When the system frequency is set to 50i, factory default
setting value is set to –18 dB.
*+4 dB [>>> +4dB]: Set to +4 dB.
0 dB [>>> 0dB]: Set to 0 dB.
–3 dB [>>> –3dB]: Set to –3 dB.
–6 dB [>>> –6dB]: Set to –6 dB.
Note
–3 dB is displayed only when the system frequency is set to
50i.
*+4 dB [>>> +4dB]: Set to +4 dB.
0 dB [>>> 0dB]: Set to 0 dB.
–3 dB [>>> –3dB]: Set to –3 dB.
–6 dB [>>> –6dB]: Set to –6 dB.
Note
–3 dB is displayed only when the system frequency is set to
50i.
*+4 dB [>>> +4dB]: Set to +4 dB.
0 dB [>>> 0dB]: Set to 0 dB.
–3 dB [>>> –3dB]: Set to –3 dB.
–6 dB [>>> –6dB]: Set to –6 dB.
Note
–3 dB is displayed only when the system frequency is set to
50i.
SILENCE [>> silence]: Silent signal
*1kHz SINE [>> 1kHz]: 1 kHz, –20 dB FSignal as the audio
input in the video/audio input selection section on the front
panel, the audio test signal generated by the internal audio
test signal generator is input.