Sony HDV HVR-1500 Operating Instructions Manual page 78

TIME CODE [Time code]: Settings related to the timecode
generator
TC SELECT [> TC select]: Determine which to display in the
time counter display, TC or VITC.
Note
TC is always displayed regardless the setting during the HDV
mode.
VITC [> VITC]: Determine whether to record the internally
generated timecode as VITC.
Note
This setting is invalid when the recording mode is in HDV
format.
TCG REGEN [> TCG regen]: Select the signal to be
regenerated when the timecode generator is in the
regeneration mode (i.e., when the TC MODE menu item is
set to INT REGEN or EXT REGEN).
UB BINARY GP. [> Binary Gp.]: Select the user bit binary
group flag of the timecode generator.
Note
When the TC MODE menu item is set to EXT REGEN, the
user-bit binary group flag setting follows the setting on the
timecode input to this unit.
VITC POS SEL-1 [> VITC pos-1]: Select a line to insert the
VITC in.
VITC POS SEL-2 [> VITC pos-2]: Select a line to insert the
VITC in.
VITC OUTPUT [> VITC out]: Select the timecode to be output
as VITC.
EE OUT PHASE [> EE out]: Determine the output phase for
the LTC signal output from the TC OUT connector when
recording timecode and in STOP REC mode (forced EE
mode).
78
Menu Contents
Description of settings
VITC [>> VITC]: Display VITC.
*TC [>> TC]: Display TC.
OFF [>> OFF]: Do not record the internally generated
timecode as VITC. (VITC present in the input video signal
is recorded unchanged.)
*ON [>> ON]: Record the internally generated timecode as
VITC.
*TC & UB [>> TC & UB]: Both the timecode and user bit data
are regenerated.
TC [>> TC]: Only the timecode is regenerated.
UB [>> UB]: Only the user bit data are regenerated.
*000: NOT SPECIFIED [>> 000]: Character set not specified
001: ISO CHARACTER [>> 001]: 8-bit characters conforming
to ISO 646 and ISO 2022
010: UNASSIGNED-1 [>> 010]: Undefined
011: UNASSIGNED-2 [>> 011]: Undefined
100: UNASSIGNED-3 [>> 100]: Undefined
101: PAGE/LINE [>> 101]: Multiplex
110: UNASSIGNED-4 [>> 110]: Undefined
111: UNASSIGNED-5 [>> 111]: Undefined
20 LINE [>> 20 line] to 12 LINE [>> 12 line]: Select any line
from 12 to 20.
Factory default setting: *16 LINE [>> 16 line]
Notes
• You can insert the VITC signal in two places. To insert it in
two places, set both this item and also VITC POS SEL-2.
• The setting values are as follows when the system frequency
is set to 50i.
9 LINE [>> 9 line] to 22 LINE [>> 22 line]: Select any line
from 9 to 22.
Factory default setting: *19 LINE [>> 19 line]
20 LINE [>> 20 line] to 12 LINE [>> 12 line]: Select any line
from 12 to 20.
Factory default setting: *18 LINE [>> 18 line]
Notes
• You can insert the VITC signal in two places. To insert it in
two places, set both this item and also VITC POS SEL-1.
• The setting values are as follows when the system frequency
is set to 50i.
9 LINE [>> 9 line] to 22 LINE [>> 22 line]: Select any line
from 9 to 22.
Factory default setting: *21 LINE [>> 21 line]
OFF [>> OFF]: Do not output VITC.
TC [>> TC]: Output TC after converting it into VITC.
*VITC [>> VITC]: Output VITC.
*NO OUTPUT [>> NO OUT]: Suppress the output.
THROUGH [>> through]: Output the timecode input to the TC
IN connector as it is.
VIDEO INPUT PHASE [>> V input]: Output the timecode with
the same phase as the input video signal phase.
VIDEO OUTPUT PHASE [>> V output]: Output the timecode
with the same phase as the output video signal phase.