Sony HDV HVR-1500 Operating Instructions Manual page 31

When the SUB STATUS menu item is set to TC
MODE:
On-screen indication Meaning
INT PRST FREE [IP F] The internal timecode generator is
operating in FREE RUN mode.
INT PRST REC [IP R] The internal timecode generator is
operating in REC RUN mode.
INT REGEN-T&U The internal timecode generator is
[IRTU] in synchronization with the
playback timecode (LTC) read
from tape.
EXT LTC-T&U [ELTU] The internal timecode generator is
in synchronization with the
external timecode (LTC) input to
the unit and is generating the
same timecode value and user bit
value as those of the external
timecode (regeneration).
EXT VITC-T&U [EVTU] The internal timecode generator is
in synchronization with VITC
present in the external video signal
input to the unit and is generating
the same timecode value and user
bit value as those of the external
timecode (regeneration).
EXT DVIN-T&U [EDTU] The internal timecode generator is
in synchronization with the
external timecode input to the unit
via the i.LINK ( HDV/DV)
interface and is generating the
same timecode value and user bit
value as those of the external
timecode (regeneration).
EXT DVIN. V-T&U The internal timecode generator is
[EDTU] in synchronization with the
external VITC input to the unit via
the i.LINK ( HDV/DV) interface
and is generating the same
timecode value and user bit value
as those of the external timecode
(regeneration).
EXT SDI-T&U The internal timecode generator is
[ESTU] in synchronization with the
embeded LTC (RP188) input to the
unit via the SDI interface and is
generating the same timecode
value and user bit value as those
of the external timecode
(regeneration).
When the SUB STATUS menu item is set to REMAIN:
On-screen Meaning
indication
REMAIN 184 min Remaining capacity of the tape in
minutes.
When the remaining capacity has not
been calculated, "REMAIN --- min"
appears.
When the SUB STATUS menu item is set to AUDIO
MIXING:
On-screen Meaning
indication
1 2 3 4 Input audio channels selected for
[MIX] mixing
1 2 3 4: Input audio channels 1, 2, 3
and 4
Example display:
12 2 3
Input audio channels 3 and 4 are
mixed and recorded on audio
channel 4 on tape.
Input audio channel 3 is recorded on
audio channel 3 on tape.
Input audio channel 2 is recorded on
audio channel 2 on tape.
Input audio channels 1 and 2 are mixed and
recorded on audio channel 1 on tape.
Display format of supplementary status
information when the SUB STATUS menu
item is set to ALL
All items of supplementary status information are
displayed in the order shown below.
Example display:
T C R 0 0 : 0 4
P L A Y
V 1 2 3 4 T
Editing mode settings
Setting for input audio mixing
Operating mode of the internal
timecode generator (The rightmost "V"
appears when the VITC menu item (see
page 78) is set to ON.)
Displaying Supplementary Status Information
34
: .
4 7 0 7
L O C K
X D
M I E T U V
31