Table of Contents
Advertisement
12 February 1992
(2) Friction Pad Replacement
[B]
[C]
1. Pull out the paper tray.
2. Remove the friction pad holder mounting bracket [A] from the paper tray
(2 screws with washers).
3. Unhook the spring [B] from the pressure release lever.
4. Remove the friction pad assembly [C] from the mounting bracket (1 screw
and 1 swivel bushing).
5. Lubricate the sliding surface [D] of the new friction pad assembly slightly
with "Albania 2" grease.
6. Install the new friction pad assembly on the mounting bracket and
reassemble the paper tray.
NOTE: If the friction pad assembly is replaced for several paper trays at the
same time, make sure that the friction pad holder mounting bracket is
placed back to the original paper tray.
To identify the original position, the mounting bracket and the paper
tray have the identical decals such as "A", "B", ....
[A]
5-37
[D]
PAPER FEED
Advertisement
Table of Contents
