DEVELOPMENT AND TONER SUPPLY
3.2
DEVELOPER REPLACEMENT
3.2.1 Black Developer (SP#65)
[A]
1. Take out the development unit.
2. Set the development unit on a large sheet of paper [A].
3. Remove the toner supply unit [B] (3 screws).
4. Turn the paddle roller knob [C] counterclockwise to empty developer onto
the paper.
NOTE: Dispose of the used developer according to local regulations.
5. Make sure that no developer remains on the development roller or in the
development unit.
6. Pour one pack of developer into the development unit while turning the
paddle roller knob.
7. Reinstall the toner supply unit and set the development unit in the
machine.
8. Perform initial setting for new black developer using SP65.
[B]
[C]
5-24
12 February 1992