Table of Contents
Advertisement
SECTION 3. OPERATION WITH EVOLUTION ELITE OPEN FRYERS
Figure 1
Figure 2
Figure 3
Figure 4
811
1. Open the door, lift-up on the drain pan stop and pull-out
the drain pan assembly, using the handle on the drain
pan. Figures 1 & 2.
2. Release cover latch, and hinge back cover on oil
disposal shuttle. Figure 3. Make sure crumb catcher is
in place.
3. Roll oil disposal shuttle under fryer until it stops. Make
sure drain aligns with opening in shuttle. Figure 4.
TO AVOID PERSONAL INJURY, BURNS,
SPILLS, AND CORROSION:
DO NOT OVERFILL. SHUTTLE HOLDS
OIL FROM ONE FULLSIZE VAT OR
TWO SPLIT VATS ONLY
DO NOT PUT WATER AND/OR
CLEANER IN THE SHUTTLE
OIL ONLY
DO NOT TRANSPORT OIL WITHOUT
COVER IN PLACE
4. Using the fryer controls, press and hold
side) until display shows *FILTER MENU*, along
with "1.EXPRESS FILTER".
5. Press and release
"3.DISPOSE". Press √ button and display shows
"DISPOSE?" along with "YES NO".
To reduce the risk of fire or electrical shock, do not
empty more than one full vat or two split vats at one
time.
(on either
twice until display shows
ODS-450
3-1
Advertisement
Table of Contents
