Table of Contents
Advertisement
If your child restraint system
is not equipped with a lock-
off (a seat belt locking fea-
ture),
restraint system using a lock-
ing clip.
After installing the child restraint system, rock it back and forth to
ensure that it is installed securely. (P. 70)
■
Removing a child restraint system installed with a seat belt
Press the buckle release button and fully retract the seat belt.
When releasing the buckle, the child restraint system may spring up due
to the rebound of the seat cushion. Release the buckle while holding
down the child restraint system.
Since the seat belt automatically reels itself, slowly return it to the stow-
ing position.
■
When installing a child restraint system
When installing a child restraint system
When installing a child restraint system
You may need a locking clip to install the child restraint system. Follow the
You may need a locking clip to install the child restraint system. Follow the
You may need a locking clip to install the child restraint system. Follow the
instructions provided by the manufacturer of the system. If your child restraint
system does not provide a locking clip, you can purchase the following item
from any authorized Toyota retailer or Toyota authorized repairer, or any reli-
able repairer: Locking clip for child restraint system
(Part No. 73119-22010)
AYGO_OM_Europe_OM99W80E
secure
the
child
www.carobook.com
www.carobook.com
www.carobook.com
1-2. Child safety
69
1
Advertisement
Table of Contents
