Toyota Aygo 2020 Manual page 206

Table of Contents

Advertisement

206
4-2. Driving procedures
Manual transmission
Check that the parking brake is set.
Check that the shift lever is set in N. (P. 215)
Firmly depress the clutch pedal.
The smart entry & start system indicator light (green) will turn on. If the
indicator light does not turn on, the engine cannot be started.
Press the engine switch shortly
and firmly.
When operating the engine switch,
one short, firm press is enough. It
is not necessary to press and hold
the switch.
The engine will crank until it starts
or for up to 30 seconds, whichever
is less.
Continue depressing the clutch
pedal until the engine is completely
started.
The engine can be started from
any engine switch mode.
any engine switch mode.
any engine switch mode.
Stopping the engine
Stop the vehicle.
Shift the shift lever to E, M or R (multi-mode manual transmission)
or N (manual transmission).
Set the parking brake. (P. 218)
Press the engine switch.
Release the brake pedal (multi-mode manual transmission) or
clutch pedal (manual transmission) and check that the smart entry
& start system indicator light (green) is off.
AYGO_OM_Europe_OM99W80E
www.carobook.com
www.carobook.com
www.carobook.com
www.carobook.com
www.carobook.com
www.carobook.com
www.carobook.com
www.carobook.com
www.carobook.com
www.carobook.com
www.carobook.com
www.carobook.com
www.carobook.com
www.carobook.com
www.carobook.com
www.carobook.com
www.carobook.com
www.carobook.com
www.carobook.com
www.carobook.com
www.carobook.com
www.carobook.com
www.carobook.com
www.carobook.com
www.carobook.com
www.carobook.com
www.carobook.com
www.carobook.com
www.carobook.com

Advertisement

Table of Contents
loading

Table of Contents