Toyota Aygo 2020 Manual page 242

242
4-5. Toyota Safety Sense
Changing settings of the pre-collision system
■
Enabling/disabling the pre-collision system
Press the PCS switch for 3 sec-
onds or more.
The PCS warning light will turn
on and a message will be dis-
played in the drive monitor dis-
play when the system is turned
off.
To enable the system, press the
PCS switch again.
The
enabled each time the engine is
started.
■
Changing the pre-collision warning timing
Press the PCS switch to turn on the PCS activation indicator and
display the current warning timing in the drive monitor display. Each
time the PCS switch is pressed in the displayed state, the timing for time the PCS switch is pressed in the displayed state, the timing for time the PCS switch is pressed in the displayed state, the timing for
the warning changes as follows: the warning changes as follows: the warning changes as follows:
If the operation timing setting has been changed, the setting will be
retained the next time the engine is started.
Far
1
The warning will begin to oper-
ate earlier than with the default
timing.
Middle
2
This is the default setting.
Near
3
The warning will begin to oper-
ate later than with the default
timing.
AYGO_OM_Europe_OM99W80E
pre-collision system
www.carobook.com www.carobook.com www.carobook.com
is