Table of Contents
Advertisement
106
2. Instrument cluster
■
Trip meters "A" and "B"
Displays the distance the vehicle has been driven since the meter
was last reset. Trip meters "A" and "B" can be used to record and
display different distances independently.
Push and holding one of the "DISP" buttons will reset the trip meter that
is currently displayed.
■
Stop & Start system operation time (if equipped)
● Displays the amount of time the engine was stopped due to oper-
ation of the Stop & Start system during the current trip.
Vehicles without a smart entry & start system: From the engine switch in
the "ON" position to the engine switch in the "LOCK" position.
Vehicles with a smart entry & start system: From the engine switch in
IGNITION ON mode to the engine switch off.
● When the Stop & Start system is operating, the presently dis-
played screen is interrupted and the Stop & Start system opera-
tion time automatically displayed.
• Push one of the "DISP" buttons to return to the previous screen.
• The automatically displayed function of the Stop & Start system oper-
ation time activated or deactivated switch over method. (P. 108)
■
Stop & Start system total operation time (if equipped)
Stop & Start system total operation time (if equipped)
Stop & Start system total operation time (if equipped)
Displays the total amount of time that the engine has been stopped
due to operation of the Stop & Start system since the system was
last reset.
Push and hold one of the "DISP" buttons to reset.
■
Outside temperature (vehicles with a multi-mode manual
transmission)
Displays the outside temperature. (
■
Current fuel consumption
Displays the current rate of fuel consumption.
AYGO_OM_Europe_OM99W80E
www.carobook.com
www.carobook.com
P. 363)
Advertisement
Table of Contents
