[B] Maintenance Mode - Hoshizaki DIM-40DE-HC Service Manual

[b] MAINTENANCE MODE

When the reset switch is pressed for more than 3 seconds, the maintenance mode
starts to allow various set values to be checked or adjusted.
1) Press the reset switch for more than 3 seconds while the unit is running. The display
shows "1".
2) Press the service 1 switch
decrease the number.
3) Press the reset switch to select the desired number. The current set value flashes in
the display.
4) Press the service 1 switch to increase the set value and the service 2 switch
decrease the set value.
5) Press the reset switch to select the desired value. The display shows the number
again.
To reset, leave the switches untouched for 30 seconds.
to increase the number and
18
the service 2 switch to
to