Hoshizaki DCM-270BAH Instruction Manual
Cubelet icemaker/dispenser
Hide thumbs
Also See for DCM-270BAH:
- Service manual (52 pages) ,
- Parts list (35 pages) ,
- Instruction manual (20 pages)
Related Manuals for Hoshizaki DCM-270BAH
Summary of Contents for Hoshizaki DCM-270BAH
- Page 1 Hoshizaki Hoshizaki America, Inc. Cubelet Icemaker/Dispenser Models DCM-270BAH DCM-270BAH-OS INSTRUCTION MANUAL “A Superior Degree of Reliability” www.hoshizaki.com Issued: 11-15-2013...
- Page 2 Should the reader have any questions or concerns which have not been satisfactorily addressed, please call, send an e-mail message, or write to the Hoshizaki Technical Support Department for assistance. Phone: 1-800-233-1940; (770) 487-2331 Fax: 1-800-843-1056;...
-
Page 3: Table Of Contents
Important Safety Information ....................4 I. Specifications ........................6 A. Electrical and Refrigerant Data ..................6 B. Dimensions/Connections ....................7 1. DCM-270BAH ......................7 2. DCM-270BAH-OS ....................8 II. Installation and Operating Instructions ................9 A. Location ........................9 B. Checks Before Installation ................... 10 C. -
Page 4: Important Safety Information
Important Safety Information Throughout this manual, notices appear to bring your attention to situations which could result in death, serious injury, damage to the appliance, or damage to property. WARNING Indicates a hazardous situation which could result in death or serious injury. - Page 5 WARNING, continued • Do not make any alterations to the appliance. Alterations could result in electric shock, injury, fire, or damage to the appliance. • Do not place fingers or any other objects into the ice discharge opening. • The appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
-
Page 6: Specifications
The nameplate is located on the rear panel. For certification marks, see the nameplate. We reserve the right to make changes in specifications and design without prior notice. Model Number DCM-270BAH DCM-270BAH-OS AC Supply Voltage 115-120/60/1 Amperes 8.5 AMPS... -
Page 7: Dimensions/Connections
B. Dimensions/Connections 1. DCM-270BAH... -
Page 8: Dcm-270Bah-Os
2. DCM-270BAH-OS... -
Page 9: Installation And Operating Instructions
II. Installation and Operating Instructions WARNING • The appliance must be installed in accordance with applicable national, state, and local codes and regulations. • Failure to install, operate, and maintain the appliance in accordance with this manual will adversely affect safety, performance, component life, and warranty coverage and may result in costly water damage. -
Page 10: Checks Before Installation
• Check that the refrigerant lines do not rub or touch lines or other surfaces, and that the fan blade turns freely. • The appliance can be installed on a countertop or on an optional stand. If using an optional stand, Hoshizaki Stand SD-270 is recommended. C. How to Remove Panels See Fig. 1 or Fig. 2 •... -
Page 11: Setup
D. Setup 1) Position the appliance in the selected permanent location. If attaching to a stand, refer to the installation instructions included with the stand. 2) Level the appliance from side-to-side and front-to-rear by adjusting the legs. 3) Replace the panels in their correct positions. E. -
Page 12: Water Supply And Drain Connections
• External filters, strainers, or softeners may be required depending on water quality. Contact your local Hoshizaki Certified Service Representative or local Hoshizaki distributor for recommendations. • In areas where water damage is a concern, install in a contained area with a floor drain. -
Page 13: Final Checklist
G. Final Checklist WARNING CHOKING HAZARD: Ensure all components, fasteners, and thumbscrews are securely in place after installation. Make sure that none have fallen into the storage bin. 1) Is the appliance level? 2) Is the appliance in a site where the ambient temperature is within 45°F to 100°F (7°C to 38°C) and the water temperature within 45°F to 90°F (7°C to 32°C) all year around? 3) Is there at least 6"... -
Page 14: Startup
H. Startup WARNING All parts are factory-adjusted. Improper adjustments may adversely affect safety, performance, component life, and warranty coverage. NOTICE • If the appliance is turned off, wait for at least 3 minutes before restarting the appliance to prevent damage to the compressor. •... - Page 15 8) Set the bin top in place without fastening it. 9) Remove the louver and air filter. Plug in the appliance. Move the control switch to the "DRAIN" position, then move the power switch to the "ON" position. Allow the water system to drain completely (you will see the water draining into the drain pan).
-
Page 16: Maintenance
III. Maintenance The appliance must be maintained in accordance with the instruction manual and labels provided with the appliance. Consult with your local Hoshizaki Certified Service Representative about maintenance service. To obtain the name and phone number of your local Hoshizaki Certified Service Representative, visit www.hoshizaki.com. -
Page 17: Maintenance Schedule
A. Maintenance Schedule The maintenance schedule below is a guideline. More frequent maintenance may be required depending on water quality, the appliance's environment, and local sanitation regulations. Maintenance Schedule Frequency Area Task Every 2 Air Filter Inspect. Wash with warm water and neutral cleaner if dirty. Weeks Monthly External Water... -
Page 18: Cleaning And Sanitizing Instructions
1. Cleaning Solution Dilute 6.0 fl. oz. (177 ml or 12 tbs) of Hoshizaki "Scale Away" with 1.0 gal. (3.8 l) of warm water. This is a minimum amount. Make more solution if necessary. IMPORTANT! For safety and maximum effectiveness, use the solution immediately after dilution. - Page 19 6) Pour the cleaning solution over the extruding head until the evaporator assembly and the reservoir are full and the solution starts to overflow into the drain pan. Allow to soak for 10 minutes. Note: If there is excessive scale on the extruding head, fill the evaporator assembly and reservoir as described above, then use a clamp on the reservoir hose between the reservoir and evaporator assembly to block flow.
-
Page 20: Sanitizing Solution
3. Sanitizing Solution Dilute 1.5 fl. oz. (44 ml or 3 tbs) of a 5.25% sodium hypochlorite solution (chlorine bleach) with 3 gal. (11.4 l) of warm water. This is a minimum amount. Make more solution if necessary. IMPORTANT! For safety and maximum effectiveness, use the solution immediately after dilution. - Page 21 7) Remove the front panel, top panel, and bin top. 8) Pour clean, warm water into the storage bin and melt any remaining ice. Remove the agitator. Pour clean, warm water over the extruding head until the evaporator assembly and the reservoir are full and the water starts to overflow into the drain pan. Plug in the appliance, then move the power switch to the "ON"...
-
Page 22: Preparing The Appliance For Periods Of Non-Use
IV. Preparing the Appliance for Periods of Non-Use During extended periods of non-use, extended absences, or in sub-freezing temperatures, follow the instructions below. When the appliance is not used for two or three days under normal conditions, it is sufficient to move the power switch to the "OFF" position. -
Page 23: Disposal
V. Disposal The appliance contains refrigerant and must be disposed of in accordance with applicable national, state, and local codes and regulations. Refrigerant must be recovered by properly certified service personnel. - Page 24 HOSHIZAKI AMERICA, INC. 618 Hwy. 74 S., Peachtree City, GA 30269 USA TEL (770) 487-2331 FAX (770) 487-3360 www.hoshizaki.com 1A3263-010...