Troubleshooting - Tascam Professional CD-RW900 Owner's Manual

Troublshooting
Symptom
There is no power to the unit.
"Disc Error!" is displayed.
Playback is not possible.
No sound is output.
Recording is not possible.
Noise or static can be heard.
The CD-RW900 does not retain settings.
8-Reference and specifications
Possible cause and remedy
Please check the power cord is properly plugged in. Please check the power cord is properly plugged in.
The disc may be dirty. Please replace the disc. The disc may be dirty. Please replace the disc.
This may be due to condensation. In this case, remove the disc, turn
the power on and wait a few hours, then try again.
≠ Confirm the connections with the audio system.
≠ Check the volume level, and proper amplifier operation.
≠ Confirm the connections with the audio system.
≠ Adjust the recording level.
≠ The disc may be for playback only. Please replace with a recordable disc.
Please re-position the unit away from strong source of magnetism
such as a television.
While settings are retained each time they are made, in some case
they will not be retained when the power is turned off too soon. To
prevent this from happening, do not turn off the power right after
making a setting.
1-Introduction
TASCAM CD-RW900