Push Button; Remote Control - BEA ULTIMO Manual

4
SETUP
Ensure that the infrared field is clear of any obstructions.
The sensor can be set up using either the push button or the remote control:

PUSH BUTTON:

Press the gray knob twice.

REMOTE CONTROL:

Use the following remote control button sequence:
During setup, the LCD will display the camera icon and the LED will slowly
flash red/green and then turn off.
Test the proper operation of the system installation before leaving the premises!
Page 14 of 20
2x
+
slow
flash
75.0034.03 ULTIMO 20220120