3
Paper feed guide
Insert this in the roll paper cover to use fanfold paper.
4
Fanfold paper cover
Open this cover to load or replace the fanfold paper. (U
page
Connectors
1
Air vent
Exhausts heat generated in the printer to prevent the temperature inside the printer from rising.
Provide a clearance of 10 cm {3.93"} or more from the area around the air vent to ensure ventilation
when installing the printer.
2
DC-IN connector
Connect the cable of the AC adapter.
3
Wire saddle
Pass the USB cable through this saddle to prevent disconnection of the cable.
4
Ethernet connector
Connect a LAN cable.
Downloaded from
ManualsNet.com
56)
search engine
"Loading and Replacing Fanfold Paper" on
5
1
2 3 4
6
7
24