Epson TM-C3500 User Manual page 121

How to Adjust the Cut Position
Adjust the cut position to match the media form used.
When using media with a perforated line, adjust the cut position so that the perforated line is
not cut.
Die-cut label (Gap)
Downloaded from ManualsNet.com
Media Form
• When the adjustment value is +, the cut position moves closer to the
reference position (print start position).
• When the adjustment value is –, the cut position moves away from the
reference position (print start position).
Paper feed
direction
search engine
Description
Backing paper
Label
Printable area
Label
Reference position
(print start position)
Cut position
121