Setting The Room 2 Setup - Sherwood Newcastle R-871 Operating Instructions Manual

SETTING THE ROOM 2 SETUP

• The ROOM 2 function allows enjoying one source in the main room while playing another in a different
room at the same time.
Notes:
• The analog signals from the EXTERNAL INs and the digital signals cannot be output to the different
room, meaning no playback in a different room.
• You cannot play the ROOM 2 source in any surround mode.
Press the CURSOR UP(▲)/DOWN(▼) buttons to select the desired item.
1
Press the CURSOR LEFT(◀)/RIGHT(▶) buttons to set the selected item as desired.
2
When selecting the ROOM 2
OFF : To turn off the ROOM 2 function.
↕
ON : To turn it on.
Notes:
• When the ROOM 2 is set to OFF, the INPUT and the VOLUME cannot be selected.
• When you do not use the ROOM 2 function, set the ROOM 2 to OFF to save electricity.
When selecting the INPUT
• You can select the desired among MAIN source, TUNER, CD, AUX, TAPE, VIDEO 1 ~ VIDEO 5 as a
ROOM 2 source.
Note:
• When the EXTERNAL IN is selected as a main input, if the MAIN source is selected as a ROOM 2 input,
no audio signals can be heard in the different room (ROOM 2).
When selecting the VOLUME
• You can adjust the volume on the power amplifier assigned to ROOM 2 when the SURROUND BACK/
ROOM 2 speaker terminals are connected to the speakers in a different room.
Note:
• You can adjust the VOLUME only when the power amplifier for surround back/room 2 channels is
assigned to "ROOM 2". (For details, refer to "When selecting the AMP ASSIGN" on page 49.)
• ROOM 2 : To turn on or off the ROOM 2 function.
• INPUT : To select the desired ROOM 2 source.
• VOLUME : To adjust the volume on the power
amplifier assigned to ROOM 2.
Note:
• The VOLUME cannot be adjusted when the AMP
ASSIGN is assigned to SURR BACK.
(For details, refer to "When selecting the AMP
ASSIGN" on page 49.)
68