Sherwood Newcastle R-871 Operating Instructions Manual page 67

When selecting the DOLBY HEADPHONE
• You can select the desired listening mode for each Dolby Headphone mode.
Note:
• The listening mode setting is valid only when playing analog stereo, PCM 2 channel or Dolby Digital 2
channel source.
Press the CURSOR UP(▲)/DOWN(▼) buttons to select the DOLBY HEADPHONE, then
1
press the ENTER button.
Press the CURSOR UP(▲)/DOWN(▼) buttons to select the desired Dolby Headphone mode.
2
Press the CURSOR LEFT(◀)/ RIGHT(▶) buttons to select the desired listening mode.
3
4
Repeat the above steps ② and ③ to select the desired listening modes for other Dolby
Headphone modes.
MOVIE : This provides the surround effect suitable
for movie sources.
MUSIC 1 : This provides the surround effect suitable
for music sources.
MUSIC 2 : This provides less surround effect
compared to MUSIC 1 mode.
66