Sherwood Newcastle R-871 Operating Instructions Manual page 66

When selecting the DOLBY PLII MUSIC
• You can adjust the various surround parameters for optimum surround effect.
Note:
• The parameter settings are valid only when listening in either Dolby Pro Logic II Music mode or the
Dolby Pro Logic IIx Music mode.
Press the CURSOR UP(▲)/DOWN(▼) buttons to select the DOLBY PLII MUSIC, then press
1
the ENTER button.
Press the CURSOR UP(▲)/DOWN(▼) buttons to select the desired parameter.
2
Press the CURSOR LEFT(◀)/ RIGHT(▶) buttons to adjust the selected parameter as desired.
3
4
Repeat the above steps ② and ③ to adjust other parameters.
When selecting the PANORAMA mode
This mode extends the front stereo image to include
the surround speakers for an exciting "wraparound"
effect with side wall imaging. Select "OFF" or
"ON"(default value:OFF).
When selecting the CENTER WIDTH control
This adjusts the center image so it may be heard only
from the center speaker, only from the left/right
speakers as a phantom image, or from all three front
speakers to varying degrees.
The control can be set in 8 steps from 0 to 7(default
value : 3).
When selecting the DIMENSION control
This gradually adjusts the soundfield either towards
the front or towards the rear. The control can be set in
7 steps from -3 to +3(default value : 0).
65