Sherwood Newcastle R-871 Operating Instructions Manual page 64

Memorizing the adjusted channel levels
• You can memorize the adjusted channel levels into preset memory("REFERENCE 1", "REFERENCE 2")
and recall the memorized whenever you want.
After performing the steps ①~③ in "Adjusting the current channel level" procedure on page
1
62, press the CURSOR UP(▲)/DOWN(▼) buttons to select a channel (, not the MODE
(memory mode) and the LFE LEVEL SETUP), then press the ENTER button.
Press the CURSOR LEFT(◀)/RIGHT(▶) buttons to select the desired preset memory,
2
then press the ENTER button.
Recalling the memorized channel levels
Press the CURSOR UP(▲)/DOWN(▼) buttons to select the MODE(memory mode).
1
Press the CURSOR LEFT(◀)/ RIGHT(▶) buttons to select the desired one of REFERENCE 1
2
and REFERENCE 2.
• The "REFERENCE 1" indication flickers.
• Each time the CURSOR LEFT(◀) or RIGHT(▶)
button is pressed, "REFERENCE 1" or
"REFERENCE 2" is selected.
• The adjusted channel levels have now been
memorized into the selected memory.
• "CALIBRATE" may be displayed instead of
"REFERENCE 1" or "REFERENCE 2".
• Then the channel levels memorized into the
selected preset memory are recalled.
63