Recording - Sherwood Newcastle R-872 Operating Instructions Manual

RECORDING

• The analog signals from the EXTERNAL INs as well as the digital signals from the HDMI IN, the OPTICAL or COAXIAL
DIGITAL IN can be heard but cannot be recorded.
• When recording the analog signals from CD, AUX, VIDEO 1~4, be sure to select "ANALOG" for the AUDIO MODE.
(For details, refer to "When selecting the AUDIO MODE" on page 58.)
• When recording the video signals from VIDEO 2~4, be sure to select "COMPOSITE" or "S-VIDEO" for the VIDEO MODE.
(For details, refer to "When selecting the VIDEO MODE" on page 57.)
• The volume and tone (bass, treble) settings have no effect on the recording signals.
Recording with TAPE
1.
Select the desired input as a recording source
except for TAPE.
2.
Start recording on the TAPE.
3.
Start play on the desired input.
Dubbing from video components onto
VIDEO 1
1.
Select the desired of VIDEO 2 ~ 4 as a recording
source except VIDEO 1.
2.
Start recording on the VIDEO 1.
3.
Start play on the desired input.
• The audio and video signals from the desired
input will be dubbed onto the VIDEO 1 and you
can enjoy them on the TV set and from the
speakers.
Dubbing the audio and video signals
separately onto VIDEO 1
Example: When dubbing the VIDEO 2 video signal and
the CD audio signal separately onto VIDEO 1.
1.
Select VIDEO 2 as a video recording source.
2.
Select CD as an audio recording source.
3.
Start recording on the VIDEO 1.
4.
Start play on the VIDEO 2 and the CD
respectively.
• The audio signal from the CD and the video
signal from the VIDEO 2 will be dubbed and you
can enjoy them on the TV set and from the
speakers.
Note :
Be sure to observe the order of the above steps 1
•
and 2.
45