Sherwood Newcastle R-872 Operating Instructions Manual page 41

Manual presetting
• You can store up to 30 preferred stations in the
memory.
1.
Tune in the desired station with auto or manual
tuning.
2.
Press the MEMORY/ENTER button.
• "MEMORY" is flickering for several seconds.
3.
Select the desired preset number (1~30) and
press the MEMORY/ENTER button.
• The station has now been stored in the memory.
• A stored frequency is erased from the memory by
storing another frequency in its place.
• If "MEMORY" goes off, start again from the above
step 2.
4.
Repeat the above steps 1 to 3 to memorize
other stations.
MEMORY BACKUP FUNCTION
The following items, set before the receiver is
turned off, are memorized.
• INPUT SELECTOR settings
• Surround mode settings
• Preset stations,etc.
Tuning to preset stations
• After selecting the tuner as an input source, select
the desired preset number.
Scanning preset stations in sequence
• The receiver will start scanning the stations in the
preset sequence and each station is received for 5
seconds.
• At the desired station, press this button again to
stop scanning.
41