Sherwood Newcastle R-872 Operating Instructions Manual page 32

When CD, AUX, VIDEO 1~ 4 is selected as
an input source
• If the AUDIO MODE is set to the mode other
than "DIGITAL" for the corresponding input
source on the INPUT SETUP menu, you cannot
hear the sound from the selected digital input.
(For details, refer to "SETTING THE INPUT
SETUP" on page 56.)
4.
Press the AUDIO ASSIGN button.
• "AUDIO ~ " is displayed for several seconds.
• "AUDIO ~ " disappears, press the AUDIO ASSIGN
button again.
5.
Select the desired of the digital inputs connected
while displaying "AUDIO ~ ".
• Each time the MULTI CONTROL knob is rotated
or the CURSOR LEFT(◀)/RIGHT(▶) buttons are
pressed, the corresponding input is selected as
follows :
■Notes:
• When the selected digital input is not connected,
the "DIG." indicator flickers and no sound will be
heard.
• The selected digital input is automatically
assigned to the corresponding input source on
the INPUT SETUP menu. (For details, refer to
"SETTING THE INPUT SETUP" on page 56.)
• The sound from the component connected to the
selected digital input can be heard regardless of
the selected input source.
6.
Operate the selected component for playback.
• When playing back the program sources with
surround sound, refer to "ENJOYING
SURROUND SOUND" on page 36.
7.
Adjust the (overall) volume.
Muting the sound
• "MUTE" flickers.
• To resume the previous sound level, press it again.
32