Verify Device Functionality And Test Network Coverage - Cisco Meraki MR36H Installation Manual

31/01/2022, 19:00

Verify Device Functionality and Test Network Coverage

1. Check LEDs
1. The Power LED should be solid green (or blue, if clients are connected). If it is flashing blue, the firmware
is upgrading and the LED should turn green when the upgrade is completed (normally within a few
minutes). See the

How can we help you?
2. Note: Your MR36H must have an active route to the Internet to check and upgrade its firmware.
https://documentation.meraki.com/MR/MR_Installation_Guides/MR36H_Installation_Guide
"LED Indicators" section for more details. .
MR36H Installation Guide - Cisco Meraki

16/21