Dyson ball animal User Manual page 9

Clearing obstructions from your
Motorbar™cleaner head
Your Motorbar™cleaner head doesn't have a washable brush bar.
To maintain optimum performance, check your brush bar regularly
and clear any obstructions.
Unplug and leave your machine to cool before checking for blockages.
Remove cleaner head
Lie your machine on its back.
Push down the red button on the bottom of the ball and then slide your
cleaner head down and off your machine.
Remove your brush bar
Press the button on the back of the Motorbar™cleaner head and push upwards
90° to release the end cap.
Pull the brush bar out of the cleaner head.
Remove debris from around the brush bar.
Be careful of any sharp objects when clearing blockages.
Replace your brush bar
Push the brush bar firmly back into the cleaner head.
Make sure the brush bar is pushed fully into the cleaner head. Rotate the end
cap until it clicks back into the locked position.
Fit the cleaner head
Slide your Motorbar™cleaner head into position on the front of the ball.
Push upwards until the red button on the underside of your machine clicks
securely in place.