Dyson ball animal User Manual page 10

Washing your filters
Wash your filters at least once a month to maintain optimum suction power.
For more information and support videos for your machine go online:
www.dyson.com/support
Washing filter A
Remove your filter
Press the button on the bin handle to detach the bin from your machine.
Wash your filter
Push up the catch on the front of the bin handle and lift out the filter.
Only wash the filter with cold water. Hold the open end of the filter under a
running tap, until the water runs clear.
Turn the filter upside down and tap it to remove excess water.
Run water over the outside of the filter until the water runs clear.
Squeeze and twist with both hands to make sure the excess water is removed.
Dry your filter
Squeeze the excess water out of your filter.
Leave your filter to dry for at least 24 hours in a well-ventilated, warm place.
Don't dry your filter in a tumble dryer, microwave or near a naked flame.
Important: your filter must be completely dry before you put it back into the
machine. Your machine could be damaged if used with a damp filter.
Refit your filter
Drop your filter back into your machine. Close the handle and make sure it
clips into place.
click
Place the base of your bin onto your machine and then push the top into
position until it clicks.