Dyson ball animal User Manual page 11

Washing filter B
Remove your filter
Lie your machine on its side with the side of the ball housing the filter
facing upwards.
Turn the lock in the centre of the ball until the filter cover is released.
Lift off the filter cover.
Twist the filter counter-clockwise until it is released and lift it off your machine.
Wash your filter
Remove the inner part of the filter.
Wash the outer filter in a rotating motion.
Wash the inner foam part of the filter, taking care not to squeeze it.
Repeat until the water runs clear.
Tap the outer filter to remove excess water.
Dry your filter
Leave both parts of your filter to dry for at least 24 hours in a well-ventilated,
warm place.
Don't dry your filter in a tumble dryer, microwave or near a naked flame.
Important: your filter must be completely dry before you put it back into the
machine. Your machine could be damaged if used with a damp filter.
Refit your filter
Refit the inner part of the filter and then place the filter back onto the ball.
Twist the filter clockwise until it clicks into position.
Refit the filter cover and turn the lock until it clicks securely into the
closed position.
click
click
click
click