Step 5: Execute The Exposure - AGFA DX-D 300 User Manual

64 | DX-D 300 | Operation

Step 5: Execute the exposure

In the operator room:
Press the exposure button to execute the exposure.
In the operator room at the NX workstation:
• The actual X-Ray exposure parameters are sent back from the console to
the NX workstation and are shown in the Image Detail pane.
• The actual X-Ray exposure parameters and the Exposure Index (EI) value
on the NX workstation can be used to monitor the performance of the
Automatic Exposure Control of the X-Ray system.
• A green OK mark appears on all thumbnails for which the exposures are
made and for which exposure settings are sent back to the NX workstation.
0172E EN 20181116 1653
WARNING:
The radiation indicator on the control console lights up
during exposure release.