Qimarox PD2 User Manual page 41

Before the CE
Installation
used.
1) Area safety fencing
The machine must be placed within a safety fencing. This safety fencing has to comply with
standards EN-ISO 14120, EN 619, and EN-ISO 13857 and the minimum required safety
distances must be met. Access doors must be interlocking complying with EN 14119.
2) Emergency stop and safety functions - Performance level
Emergency stop functions and safety functions must be added to the machine and validated.
These functions must comply with Performance level PL d or better and with EN-ISO 13849-1/2.
Safety stop functions must also comply with EN-ISO 13850.
3) Safety light curtains
Over horizontal conveyors that reduce free access, safety light curtains must have 2 beams
minimum. Otherwise safety light curtains must have 3 beams of more. They must be a type 3 or
better. The light curtains must be installed, taking into account the requirements regarding
placement and required safety distances from EN-ISO 13855.
4) Electrical installation
The electrical installation must be constructed in accordance with the regulations of EN-IEC
60204-1 (electrical safety) and EN-IEC 61000-6-2 and EN-IEC 61000-6-4 (EMC).
5) Adding of components
If machines and/or other items are added to this machine, they must comply with the safety
requirements of the Machinery Directive or other EU directives that apply to those items. At the
transitions between this machine and the added machines and/or other items, the hazards that
may be present there must be sufficiently reduced. The assembly as a whole must meet the
safety requirements of the Machinery Directive.
6) User manual
The system integrator must ensure that the end user receives a user manual, including
operating instructions, for the complete machine in the correct language.
7) Safety icons
The system integrator must supply and apply safety icons for apertures, doors and safety light
curtains in the area fencing and on control cabinets, as described in the user manual.
UM Pallet dispenser PD2 v2.0 EN
Page 2
CE Installation instructions
Pallet Dispenser PD2
instructions have been met completely, the machine must not be
EC declaration of conformity
41