Safety Provisions - Qimarox PD2 User Manual

Safety
3.3.8 Pallet quality
A good quality of pallet is essential for the efficiency and safety of the machine. Pallets
should be suitable for automated handling and stacking. No missing parts, no nails,
screws or splinters sticking out that might disrupt the handling or stacking of the pallet.
3.3.9 Side restraint adjustment
To prevent the stack from falling sideways the side restraints must me positioned close to the
stack. This would mean about 40mm between stack and restraint on each side.

3.4 Safety provisions

3.4.1 Safety equipment

Check the correct operation of the safety devices monthly.

You must not disassemble, bypass or disable any safety equipment on the machine.

The machine must not be started and must be immediately taken out of operation if even
a single item of machine safety equipment is defective.

After maintenance tasks are completed, always replace all safety equipment that has
been removed from the machine.
The following safety equipment is part of the machine:

Covers

Safety labels

Emergency stops

Area safety fencing

Safety circuits

Interlocking door switches (and possibly safety light screens)

Safety quick exhaust valve
Some part of the safety equipment may be supplied by the System integrator/OEM. See the
CE installation instructions in in chapter 8. Before the CE Installation instructions have been
met completely, the machine must not be used.
In case of non-compliance with the required safety measures, the EC Declaration of
Conformity will become null and void.
3.4.2 Safety labels
WARNING
Replace labels on the machine if they become unreadable or damaged.
14
WARNING
Danger of stack or pallets falling. Unsuitable pallets might cause
the stack to fall forward or sideways or might cause pallets to
fall from the top of the stack.
UM Pallet dispenser PD2 v2.0 EN