Starting / Stopping The Engine - Stihl KA 120 Instruction Manual

English
WARNING
After fueling, tighten down the filler cap as
securely as possible by hand.
9.3 Changing the Fuel Pickup Body
Change the fuel pickup body every year:
► Drain the fuel tank.
► Use a hook to pull the fuel pickup body out of
the tank and take it off the hose.
► Push the new pickup body into the hose.
► Place the pickup body in the tank.
12

10 Starting / Stopping the Engine

10 Starting / Stopping the
Engine
10.1 Controls
STOP-
5
4
7
2
1 Throttle trigger lockout
2 Throttle trigger
3 Slide control
10.1.1 Positions of slide control
4 STOP-0 – engine off – ignition is switched off
5 F – normal run position – the engine is running
or can start
6 START – ignition is switched on – the engine
can start
10.1.2 Symbol on slide control
7 h – stop symbol and arrow. To stop the
engine, push the slide control in the direction
of the arrow on the stop symbol (h) to
STOP-0.
10.2 Starting
► Press down the trigger lockout lever and
squeeze the throttle trigger
► and hold them in that position.
► Move the slide control to START and hold it
there.
START
6
3
1
0458-516-0121-B