Starting / Stopping The Engine - Stihl MM 56 Instruction Manual

English
Starting / Stopping the
Engine
Controls
2
1 Throttle trigger lockout
2 Throttle trigger
3 Stop switch with Run and Stop
positions. Depress the stop switch
(...) to switch off the ignition – see
"Function of Stop Switch and
Ignition System".
Function of Stop Switch and Ignition
System
The ignition is switched off and the
engine stopped when the stop switch is
depressed. The stop switch returns
automatically to the Run position when it
is released: The ignition is switched on
again after the engine stops – the engine
is then ready to start.
10
Starting the Engine
Swing bicycle handle into working
N
position – see "Adjusting the Bicycle
Handle"
4
3
Depress the manual fuel pump
N
bulb (4) at least five times – even if
the bulb is filled with fuel.
1
Cold engine (cold start)
Depress the choke knob (5) and
N
turn it to g at the same time.
5
Warm engine (warm start)
5
Depress in the choke knob (5) and
N
turn it to < at the same time.
Also use this setting if the engine has
been running but is still cold.
Cranking
Retract the wheels, if fitted.
N
Put the unit on the ground: It must
N
rest securely on the engine flange
and the support on the frame.
Check that the MultiTool is not
touching the ground or any other
MM 56 C