Starting / Stopping The Engine - Stihl MM 56 Instruction Manual

English
Opening the threaded filler cap
Turn the cap counterclockwise until
N
it can be removed from the tank
opening.
Remove the filler cap.
N
Refueling
Take care not to spill fuel while fueling
and do not overfill the tank.
Closing the threaded filler cap
Position cap.
N
Turn the cap clockwise as far as it
N
will go and tighten it as securely as
possible by hand.
12
Starting / Stopping the
Engine
Controls
2
1 Throttle Trigger Lockout
2 Throttle Trigger
3 Stop switch with Run and Stop
positions. Depress the stop switch
(...) to switch off the ignition – see
"Function of stop switch and ignition
system".
Function of stop switch and ignition
system
The ignition is switched off and the
engine stopped when the stop switch is
depressed. The stop switch returns
automatically to the Run position when it
is released: The ignition is switched on
again after the engine stops – the engine
is then ready to start.
Starting the Engine
Swing bicycle handle into working
N
position – see "Adjusting the Bicycle
Handle"
4
3
Depress the manual fuel pump
N
bulb (4) at least five times – even if
the bulb is filled with fuel.
1
Cold engine (cold start)
Depress the choke knob (5) and
N
turn it to g at the same time.
5
MM 56 C