Table of Contents
Advertisement
3.3.4 Super IO Configuration
COM1 Configuration
Use this to set parameters of COM1.
Type Select
Use this to select COM1 port type: [RS232], [RS422] or [RS485].
COM2 Configuration
Use this to set parameters of COM2.
Type Select
Use this to select COM2 port type: [RS232], [RS422] or [RS485].
COM3 Configuration
Use this to set parameters of COM3.
COM4 Configuration
Use this to set parameters of COM4.
COM5 Configuration
Use this to set parameters of COM5.
COM6 Configuration
Use this to set parameters of COM6.
Parallel Port
Enable or disable the Parallel port.
Device Mode
Select the device mode according to your connected device.
Change Settings
Select the address of the Parallel port.
WDT Timeout Reset
Use this to set the Watch Dog Timer.
35
Advertisement
Table of Contents
