H510M-H/M.2 SE
3.4.4 Super IO Configuration
Serial Port
Allows you to enable or disable the Serial port.
Configuration options: [Enabled] [Disabled]
Serial Port Address
Allows you to select the address of the Serial port.
Configuration options: [3F8h/IRQ4] [3E8h/IRQ4]
Serial Port/UART Switch
Allows you to select Serial Port function. UART is for Port 80 debug.
Configuration options: [UART] [Serial Port]
PS2 Y-Cable
Enable the PS2 Y-Cable or set this option to Auto.
Configuration options: [Auto] [Enabled]
43