Table of Contents
Advertisement
2.6 Onboard Headers and Connectors
Onboard headers and connectors are NOT jumpers. Do NOT place
jumper caps over these headers and connectors. Placing jumper caps
over the headers and connectors will cause permanent damage of the
motherboard!
CPU Fan Connector
(4-pin CPU_FAN1)
(see p.9 No. 5)
Though this motherboard provides 4-Pin CPU fan (Quiet Fan) support, the 3-Pin
CPU fan still can work successfully even without the fan speed control function.
If you plan to connect the 3-Pin CPU fan to the CPU fan connector on this
motherboard, please connect it to Pin 1-3.
Chassis Fan Connectors
(4-pin CHA_FAN1)
(see p.9 No. 2)
(4-pin CHA_FAN2)
(see p.9 No. 38)
(4-pin CHA_FAN3)
(see p.9 No. 4)
Though this motherboard provides 4-Pin chassis fan (Quiet Fan) support,
the 3-Pin chassis fan still can work successfully even without the fan speed
control function. If you plan to connect the 3-Pin chassis fan to the chassis
fan connector on this motherboard, please connect it to Pin 1-3.
SATA3 Connectors
(SATA3_0~7: see p.9, No. 21)
SATA3_6 SATA3_4 SATA3_2 SATA3_0
SATA3_7 SATA3_5 SATA3_3 SATA3_1
4 3 2 1
GND
+12V
CPU_FAN_SPEED
FAN_SPEED_CONTROL
FAN_SPEED_CONTROL
CHA_FAN_SPEED
+12V
GND
GND
+12V
CHA_FAN_SPEED
FAN_SPEED_CONTROL
1 2 3 4
4 3 2 1
FAN_SPEED_CONTROL
CHA_FAN_SPEED
+12V
GND
20
Please connect the CPU fan
cable to the connector and
match the black wire to the
ground pin.
Please connect the fan cable
4
3
to the fan connector and
2
match the black wire to the
1
ground pin.
These eight Serial ATA3 (SATA3)
connectors support SATA data
cables for internal storage
devices. The current SATA3
interface allows up to 6.0 Gb/s
data transfer rate.
Advertisement
Table of Contents
