Exposure compensation setting can be
adjusted by using the ADJ. Button or using
the Shooting Menu.
Using the ADJ. Button
(Exposure)
To change the exposure compensation set-
ting using the ADJ. Button, follow the steps
below.
Turn the Mode Dial to 5
Press the ADJ. Button.
The Exposure Compensation bar appears.
• At purchase, the exposure compensation is set to 0.0. The setting value does not appear when the default value is set.
• If your subject is not centered when shooting against light, the camera does not recognize it in the backlight condition. In this case,
adjust the exposure compensation setting.
Chapter 1 Section 3 Using Special Features for Improved Photography
5
5 (Shooting Mode).
5
Press the !"
!" buttons and specify a
!"
!"
value.
Moving it to the - (minus) side makes darker. Moving it
to the + (plus) side makes it brighter. You can also
press the shutter button in this state.
Press the O
O button.
O
O
Exposure Compensation settings are completed and
the setting value appears in the right-hand portion of
the screen.
This setting will be used for shooting until you change
it.
56