Connecting The Camera To A Computer - Ricoh Caplio G4 Operation Manual

Connecting the Camera to a Computer

After installing the software on your computer, connect your camera to it.
Make sure the camera's power is off.
Connect the USB cable to the USB port of
your computer.
Connect the USB cable to the USB termi-
nal of your camera.
Your camera turns on.
Chapter 2 Section 2 Downloading Images to a Computer
In Windows XP, the first time you connect
your camera to the computer using a USB
cable, the [Found New Hardware Wizard]
screen will appear.
Select [Install from a list or specific loca-
tion (Advanced)].
Select [Next].
Select [Search for the best driver in these
locations.] -[Include this location in the
search] and then press the [Browse] but-
ton.
134