Assigning Functions to the ADJ.
Button (ADJ Btn. Set.)
When functions are assigned to the ADJ. button, you can display
various shooting setting screens with fewer button operations and
without displaying the Shooting menu.
You can use [ADJ Btn. Set.1] to [ADJ Btn. Set.4] to assign camera
functions that can be activated by pressing the ADJ. button.
Available Settings
Off
Expo. Cmp
Wht. Bal.
ISO
Quality (Pic Quality/Size)
Focus
Sharp
AE Meter
Cont Mode
Auto BKT
To assign a function to [ADJ Btn. Set.1] to [ADJ Btn. Set.4], follow
the steps below.
1
Display the Setup menu.
• For the operating procedure, see P.133.
2
Press the " button to select [ADJ Btn. Set.1], [ADJ Btn.
Set.2], [ADJ Btn. Set.3], or [ADJ Btn. Set.4], and then
press the $ button.
3
Press the !" buttons to select
the desired setting.
4
Press the MENU/OK button, or
press the # button and then
the MENU/OK button.
Note ----------------------------------------------------------------------------------------------
For information on how to use the ADJ. button, see P.62.
*Default setting for [ADJ Btn. Set.4]
*Default setting for [ADJ Btn. Set.1]
*Default setting for [ADJ Btn. Set.2]
*Default setting for [ADJ Btn. Set.3]
Refer to
-
P.90
P.92
P.95
P.69
P.71
P.75
P.74
P.76
P.81
5
149