Switching The Screen Display - Ricoh Caplio G4 Operation Manual

Switching the Screen Display

If you press DISP, you can change the screen display mode, such as switching between display/no dis-
play of symbols, etc.
When Shooting
Display Symbols
• In Synchro-Monitor Mode, with the exception of the following operations, the LCD Monitor is turned off (No Display). This
is a useful mode to reduce power consumption.
Half-press the shutter button.
Press the Q (Quick Review) button.
Press the M button.
ADJ. Button.
• You cannot turn the LCD Monitor Display on/off by pressing T (Self-timer), F (Flash) or N (Macro) buttons.
• Turning the LCD Monitor Display Off conserves battery life. In this case, shoot using just the Viewfinder.
• In Voice Memo Mode, you can turn the LCD Monitor Display off by pressing the DISP button.
When the No Display or Grid Guide Display is on, symbols will appear for a few seconds right after you have pressed Self-timer, Flash or
Macro button.
For how to display the grid guide, see P.83.
When Playing Back
Display Symbols
DISP button
No Display
DISP button
The LCD Monitor is tuned on and you can confirm composition. After you finish shooting with
Full-Press, the LCD Monitor will automatically turn off.
You can view the photo you just took (see P.87). By pressing the Q (Quick Review) button
again, you can turn the LCD Monitor off.
The LCD Monitor Display is turned on and you can make various settings for shooting (see
P.24). By pressing the M button again, you can turn the LCD Monitor off.
The LCD Monitor Display is turned on and you can make settings for exposure control, white
balance, and ISO sensitivity (see P.55, 58, and 63). Pressing the OK button turns the LCD
Monitor off.
No Display
22
Chapter 1 Section 1 Getting Started
Grid Guide Display
Synchro-Monitor Mode