Table of Contents
Advertisement
Audio Controller
Use this item to control detection of the Azalia device.
The optional settings are: [Disabled]; [Enabled].
[Disabled]: Azalia will be unconditionally disabled;
[Enabled]: Azalia will be unconditionally enabled.
Azalia HDMI Codec
Use this item to enable or disable internal HDMI codec for Azalia.
The optional settings are: [Disabled]; [Enabled].
USB 3.0 (XHCI) Support
Use this item to enable or disable mode of operation of XHCI controller.
The default setting is: [Enable].
System Status after Power Failure
Use this item to select AC power state when power is re-applied after a power
failure.
The optional settings are: [Always Off]; [Always On]; [Former State].
*Note: The option [Always On] and [Former State] are affected by ERP function.
Please disable ERP to support [Always On] and [Former State] function.
45
Advertisement
Table of Contents
