Table of Contents
Advertisement
Verify the Shipment
Ensure that the following items are included in the shipment:
v Power cord (For the appropriate cord for your country or region, see Appendix C,
v IBM LTO Ultrium 800 GB Data Cartridge
v IBM LTO Ultrium Cleaning Cartridge
v Single-connector SAS wrap tool
v Optional Rack Mount Kit
v The IBM System Storage TS2240 Tape Drive Quick Reference (GC27-2167)
v The IBM System Storage TS2240 Tape Drive Setup, Operator and Service Guide
v Documentation CD (includes library documentation, translated safety information,
v SAS cables are not part of the ship group. They must be ordered separately.
Installing a 19-inch rack mount kit (optional)
Important: Before installing the rack shelf, read the information on rack safety. See
Before you begin, read these instructions to familiarize yourself with the installation
procedure.
Verify Kit Contents
Tools Required
v 7 mm nut driver or 7 mm socket wrench
Installing a 19-inch rack shelf
1. Decide at what level you want to install the shelf. The drive requires 3 units
2. With the sides and back of the shelf facing up, carefully lift the shelf into the
2-2
TS2240 Tape Drive Setup, Operator and Service Manual
them in an easily accessible place. Should you need to contact Technical
Support, you will be asked for these numbers.
"Ordering Optional Features, Replacement Parts, Power Cords, and Media," on
page C-1.)
(GC27-2151) (this guide)
and translated warranty information
"Rack Safety" on page xv
Qty
Description
1
fixed shelf
4
screws
2
tie wraps
1
PDU line cord
Installation Instructions (Feature 7003)
(EIAs) of rack space (see 2 in Figure 2-1 on page 2-3).
Note: All vertical rack measurements are given in rack units (U). One U is
equal to 4.45 cm (1.75 in.). The U levels are marked on labels on one
front mounting rail and one rear mounting rail.
rack between the front and back rack rails with the shelf flanges behind the front
rack rails.
Advertisement
Table of Contents
